Airsenz WiFi App Controlled Electric Panel Heater with 24/7 Timer and Thermostat

Introducing the Airsenz electric panel heater range that are packed with energy saving, eco friendly features to drastically reduce your energy consumption this winter and save you hundreds of pounds.

Electric Panel Heater with App Control

Our panel heater has been designed to be the easiest to use on the market. Simply download the Tuya Smart App on your smartphone (QR code included in the manual) and you can control all the panel heaters in your home remotely through your smartphone. Do you want to warm up your bedroom before heading to bed? Simply adjust the temperature on the bedroom panel heater on your phone without leaving your sofa. Would you like to warm the kitchen up before you leave work? Simply log on and activate the heater in the kitchen to come back to a cosy, warm home. If you prefer a more traditional approach, each heater can be simply turned on and use the up and down arrows to set your desired room temperature. You lose none of the energy saving features built into the appliance such as the accurate thermostat and open window/door detection.

Full Programming from anywhere in the World

You can also use the App to program each panel heater across 24 hours a day, 7 days a week, based around your own routines and patterns. These hourly timeslots can be set at a comfort, eco or completely off to really enhance your energy savings vs central heating. Central heating systems will often heat an entire area/floor of your home costing hundreds of pounds of excess energy use for no benefit.

Our panel heaters are perfect for the domestic or home or commercial use where central heating systems or gas boilers are not feasible such as student accommodation, flats and high rise blocks. They have been designed to only work when required, with an accurate thermostat closely monitoring your room temperature every second of the day.

Wall Mounted Installation and LOT20 Compliant

The Airsenz range are for wall mounting only and all brackets and fixings are provided. They are LOT20 compliant which is a requirement for landlords and property developers to use these in rented or new build homes/flats. The LOT20 certificate is only granted to eco friendly and energy efficient wall mounted heaters that reach certain green credentials.

Open Window and Door Detection

A further energy saving feature is open window and door detection, that cuts the heater off should it sense a sudden drop in temperature usually from a door or window being left open. Once the temperature stabilises, the heater will activate and revert back to its last setting/temperature.

They can be safely installed in a bathroom as they are IP24 rated, but they must be professionally installed by an electrician factoring in IP Zonal requirements and the plug removed.

All of the heaters are fitted with a UK plug for simple plug and play and are available in 4 sizes.

Dimensions:

500W Height 435mm x Length 515mm x Depth 130mm (including wall brackets)

1KW Height 435mm x Length 515mm x Depth 130mm (including wall brackets)

1.5KW Height 435mm x Length 645mm x Depth 130mm (including wall brackets)

2KW Height 435mm x Length 815mm x Depth 130mm (including wall brackets)

Cable Length: 1.5 metres to start of the plug.

Which heater size do I need for my room?

We recommend the calculation of 100 watts of power per square metre for well insulated properties and have designed the below grid to assist.

500W: Up to 7.5m2 rooms (3m * 2.5m)

1KW: Up to 12.5m2 rooms (3m * 4.5m)

1.5KW: Up to 17.2m2 rooms (Approximately 4m*4.5m)

2KW: Up to 22.5m2 rooms (5m*4.5m)