Tyne Fixflow Infratap

FIXFLOW 8131A - FIXED TEMPERATURE AUTOMATIC TAP

The Fixflow range of automatic taps are specifically designed to be installed at a preset temperature and controlled by a thermostatic regulator (please note, thermostatic mixing valves are sold separately). This enables a constant, regulated temperature every time the tap is activated. Fixed temperature taps are designed for public and commercial washrooms.

Fixflow Features

Control:

Designed with SCM. Stops water automatically when water flow exceeds 1 minute.

Adjustable distance:

Easily adjustable sensor range.

Strainer device:

Strainer can be removed and cleaned to prevent blocking.

Anti-blocking needle:

The solenoid valve is protected by an anti-blocking needle inside.

Power Settings:

The Tyne automatic tap has three built in power options:

1. Mains operated - Transformer included - No additional purchase required.

2. Battery operation - Battery pack is located inside the grey power box.

3. Mains powered with battery power back up.

Tyne Automatic Sensor Tap - Fixed Temperature | Wall Mounted Specification

• Operating Pressure=1.0 - 8.0 bar (14.5 - 116 PS)
• Maximum Water Temperature=70c
• Water Supply=1/2
BSP
• Capacity=6 volts
• Power Supply=240V mains operation or battery powered.
• Dimensions=Base 60 x Tap body 28 x Projection 220mm
• Packaged Dimensions=H7.5 X W38.5 X D21.5 cm
• Packaged Weight=1.91 kg
• Thermostatic Mixing Valve is sold separately. 

View Infratap brochure