San Automatic Sensor Tap - Fixed Temperature | Mains or Battery Operation

FIXFLOW 8120D - FIXED TEMPERATURE AUTOMATIC TAP

The Fixflow range of automatic taps are specifically designed to be installed at a preset temperature, controlled by a thermostatic regulator (please note thermostatic mixing valves are sold separately) ensuring a constant and regulated temperature every time the tap is activated.

Ideal for public and commercial washrooms.

Fixflow Features

Control:

Designed with SCM. Stops water automatically when water flow exceeds 1 minute.

Adjustable distance:

Easily adjustable sensor range.

Strainer device:

Strainer can be removed and cleaned to prevent blocking.

Anti-blocking needle:

The solenoid valve is protected by an anti-blocking needle inside.

Power Settings:

The San automatic tap has three built in power options:

1. Mains operated - Transformer included - No additional purchase required.

2. Battery operation - Battery pack is located inside the grey power box.

3. Mains powered with battery power back up.

San Automatic Sensor Tap - Fixed Temperature | Mains or Battery Operation Specification

• Operating Pressure=1.0 - 8.0 bar (14.5 - 116 PS)
• Maximum Water Temperature=60c
• Water Supply=1/2
BSP
• Capacity=6 volts
• Power Supply=AC220V/50Hz or DC6V (4pcs AA alkaline batteries); also can be operated by AC220V with battery backup (for controller #1 only).
• Dimensions=W 48 x H 136 x D 117mm
• Packaged Dimensions=H14.5 X W28.5 X D23 cm
• Packaged Weight=1.76 kg
• Thermostatic Mixing Valve sold separately

View Infratap brochure